Paint

Hot Metal Burnt Carbon

Do NOT thin!

Mist light coats over Alclad metal finishes

Hot Metal Burnt Carbon

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Hot Metal Carbon

Do NOT thin!

Mist light coats over Alclad metal finishes

Hot Metal Carbon

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Klear Kote Satin 60ml

Klear Kote Satin 60ml <less>

Alclad II

Paint

Gloss White Primer 60ml

Gloss White Primer 60ml for Airbrushing

Pre-Thinned for Airbrushing
Excellent Sealing Power
Good Filling Properties
Fast Drying
Easy to Sand
Application Guide
Shake or Stir for about 2 mins, ensuring contents are completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
For additional thinning and cleaning of equipment use Alclad 2 Airbrush cleaner
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C

Gloss White Primer 60ml

Gloss White Primer 60ml for Airbrushing

Pre-Thinned for Airbrushing
Excellent Sealing Power
Good Filling Properties
Fast Drying
Easy to Sand
Application Guide
Shake or Stir for about 2 mins, ensuring contents are completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
For additional thinning and cleaning of equipment use Alclad 2 Airbrush cleaner
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C <less>

Alclad II

Paint

Gloss Grey Primer 60ml

Gloss Grey Primer 60ml for Airbrushing

Pre-Thinned for Airbrushing
Excellent Sealing Power
Good Filling Properties
Fast Drying
Easy to Sand
Application Guide
Shake or Stir for about 2 mins, ensuring contents are completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
For additional thinning and cleaning of equipment use Alclad 2 Airbrush cleaner
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C

Gloss Grey Primer 60ml

Gloss Grey Primer 60ml for Airbrushing

Pre-Thinned for Airbrushing
Excellent Sealing Power
Good Filling Properties
Fast Drying
Easy to Sand
Application Guide
Shake or Stir for about 2 mins, ensuring contents are completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
For additional thinning and cleaning of equipment use Alclad 2 Airbrush cleaner
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C <less>

Alclad II

Paint

Brown Primer Micro Filler 60ml

Brown Filler Primer 60ml for Airbrushing

Pre-Thinned for Airbrushing
Excellent Sealing Power
Good Filling Properties
Fast Drying
Easy to Sand
Application Guide
Shake or Stir for about 2 mins, ensuring contents are completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
For additional thinning and cleaning of equipment use Alclad 2 Airbrush cleaner
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C

Brown Primer Micro Filler 60ml

Brown Filler Primer 60ml for Airbrushing

Pre-Thinned for Airbrushing
Excellent Sealing Power
Good Filling Properties
Fast Drying
Easy to Sand
Application Guide
Shake or Stir for about 2 mins, ensuring contents are completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
To give a less absorbent and glossy finish the surface should be lightly polished with 1200/1500 wet and dry paper or micromesh.
For additional thinning and cleaning of equipment use Alclad 2 Airbrush cleaner
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C <less>

Alclad II

Paint

Candy Violet Enamel

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Violet Enamel

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Dark Aluminium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Dark Aluminium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Dark Aluminium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Dark Aluminium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Pale Burnt Metal

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Pale Burnt Metal

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Pale Gold

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Pale Gold

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Polished Brass

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Polished Brass

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Copper

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Copper

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Magnesium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Magnesium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Steel

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Steel

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Gold Titanium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Gold Titanium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Airframe Aluminium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Airframe Aluminium

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Gunmetal

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Gunmetal

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Mirrored Gold for Lexan

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Mirrored Gold for Lexan

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

High Speed Silver

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

High Speed Silver

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. <less>

Alclad II

Paint

Prismatic Jade for Lexan

30ml
APPLICATION GUIDE LEXAN/POLYCARBONATE BODY SHELLS
Apply 2-3 light coats of PRISMATIC or HOLOMATIC SPECTRAL CHROME to the inside of a clean body shell. Allow to dry thoroughly then back with black or silver WATER BASED PAINT.

Prismatic Jade for Lexan

30ml
APPLICATION GUIDE LEXAN/POLYCARBONATE BODY SHELLS
Apply 2-3 light coats of PRISMATIC or HOLOMATIC SPECTRAL CHROME to the inside of a clean body shell. Allow to dry thoroughly then back with black or silver WATER BASED PAINT. <less>

Alclad II

Paint

Honey(clear) Primer

Honey(clear) Primer 60ml for Airbrushing

Pre-Thinned for Airbrushing
Excellent Sealing Power
Fast Drying
Application Guide
Shake or Stir for about 2 mins, ensuring contents are completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
For additional thinning and cleaning of equipment use Alclad 2 Airbrush cleaner
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C

Honey(clear) Primer

Honey(clear) Primer 60ml for Airbrushing

Pre-Thinned for Airbrushing
Excellent Sealing Power
Fast Drying
Application Guide
Shake or Stir for about 2 mins, ensuring contents are completely mixed before use.
Ensure surfaces to be coated are dry and free from all traces of contaminants.
Spray at 15-40 psi.
2-3 coats are recommended leaving 5 mins between coats.
For additional thinning and cleaning of equipment use Alclad 2 Airbrush cleaner
Air drying at 20°C: Dust-free: 5 min, Touch Dry: 10 min and Hard Dry 30 mins.
Relocatable/Applying Basecoat : After 30 mins at 20°C <less>

Alclad II

Paint

Transparent Medium

Blend transparent medium with Alclad Transparent colors to obtain lighter tints

Transparent Medium

Blend transparent medium with Alclad Transparent colors to obtain lighter tints

<less>

Alclad II

Paint

Transparent Red

Do NOT thin!

Mist light coats over Alclad metal finishes

Transparent Red

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Transparent Yellow

Do NOT thin!

Mist light coats over Alclad metal finishes

Transparent Yellow

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Transparent Green

Do NOT thin!

Mist light coats over Alclad metal finishes

Transparent Green

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Transparent Green

Do NOT thin!

Mist light coats over Alclad metal finishes

Transparent Green

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Transparent Smoke

Do NOT thin!

Mist light coats over Alclad metal finishes

Transparent Smoke

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Armoured Glass

Do NOT thin!

Mist light coats over Alclad metal finishes

Armoured Glass

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Hot Metal Sepia

Do NOT thin!

Mist light coats over Alclad metal finishes

Hot Metal Sepia

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Hot Metal Violet

Do NOT thin!

Mist light coats over Alclad metal finishes

Hot Metal Violet

Do NOT thin!

Mist light coats over Alclad metal finishes

<less>

Alclad II

Paint

Bright Silver Candy Base

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Bright Silver Candy Base

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Red

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Red

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Ruby Red

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Ruby Red

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Orange

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Orange

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Lemon Yellow

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Lemon Yellow

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Golden Yellow

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Golden Yellow

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Bottle Green

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Bottle Green

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Emerald Green

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Emerald Green

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Electric Blue

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Electric Blue

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Cobalt Blue

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Cobalt Blue

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Candy Indigo

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat

Candy Indigo

30ml
Shake Thouroughly before use.
Do not thin
Apply over alclad bright silver base
Spray 1 light coat
Wait 5 minutes
Apply further even coats, allow 5 minutes between each coat <less>

Alclad II

Paint

Alclad II Warpigs Pigment Fixer

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning.

Alclad II Warpigs Pigment Fixer

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning. <less>

Alclad II

Paint

Alclad II Warpigs Deep Rust

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning.

Alclad II Warpigs Deep Rust

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning. <less>

Alclad II

Paint

Alclad II Warpigs Light Rust

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning.

Alclad II Warpigs Light Rust

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning. <less>

Alclad II

Paint

Alclad II Warpigs Mud

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning.

Alclad II Warpigs Mud

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning. <less>

Alclad II

Paint

Alclad II Warpigs Earth

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning.

Alclad II Warpigs Earth

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning. <less>

Alclad II

Paint

Alclad II Warpigs Light earth

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning.

Alclad II Warpigs Light earth

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning. <less>

Alclad II

Paint

Alclad II Warpigs Egyptian Sand

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning.

Alclad II Warpigs Egyptian Sand

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning. <less>

Alclad II

Paint

Alclad II Warpigs North African Sand

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning.

Alclad II Warpigs North African Sand

alclad war pigs is an innovative recipe for durable modelling washes, based on artists oil paints and thinned using a combination of the highest quality thinners available. Hogwash can be applied with superb capillary action and an extensive working time of up to 36 hours. Hogwash can be stored for a long time without skinning. <less>

Alclad II